Loading ...
Loading ...
Loading ...
Cleaning and maintenance aus
23
Terminating the programme
Terminating the programme
(Reset)
1. Press START button P for
approx. 3 sec.
The numerical display h
indicates ‹:‹‚.
2. The programme sequence lasts
approx. 1 min. On the digital
display h is indicated ‹:‹‹.
3. Switch off ON/OFF switch (.
Changing the programme
When the START button P has been
pressed, the programme cannot be
changed.
The only way a programme can be
changed is by Cancel programme
(Reset).
Intensive drying
The final rinse uses a higher
temperature which improves the drying
result. The running time may increase
slightly. (Caution if utensils are delicate!)
1. Close the door.
2. Switch on ON/OFF switch (.
3. Hold down programme button #
and press START button P until
the digital display h š:‹... is
indicated.
4. Release both buttons.
To change the setting:
1. Press the button 3 to switch the
Intensive drying on š:‹‚ or off š:‹‹.
2. Press START button P.
The set value is saved.
2 Cleaning and
maintenance
Cleaning and maintenance
A regular inspection and maintenance
of your machine will help to prevent
faults. This saves time and prevents
problems.
Overall status of the
dishwasher
*The interior of your dishwasher is
predominantly self-cleaning. In order to
remove deposits, your dishwasher
automatically changes the running of the
programme (such as by increasing the
cleaning temperature) at certain
intervals. This will lead to higher
consumption values when running this
programme.
*Depending on the features of your
dishwasher
If you should find deposits in the
interior of the dishwasher in spite of
this, remove these deposits as follows:
1. Fill the detergent dispenser 1j with
detergent.
2. Select the programme with the
highest temperature.
3. Start the programme without dishes.
m Warning – Health hazard due to
detergents containing chlorine
Always use chlorine-free detergents.
Loading ...
Loading ...
Loading ...