Loading ...
Loading ...
Loading ...
Friedrich PTAC Accessories
MODEL NUMBER DESCRIPTION PHOTO
PXWS
PXGA
PXAA
PXDB
PXSC
PXDRIO
PXWE
PXSB
PXCJ
PXDC
WALL SLEEVE G-90 zinc coated steel isprepared in an
eleven-step process, then powder coated for maximum
coverage and protection. The wall sleeve is insulatedfor
sound absorption and thermal efficiency. 16" High x42"
Wide x 13¾" Deep.
GRILLE Standard, stamped aluminum, anodized to resist
chalking and oxidation.
ARCHITECTURAL GRILLES Consist of heavy-gauge
6063-15 aluminum alloy:
PXAA- Clear, extruded aluminum
PXDB- Dark bronze acrylic enamel
PXSC- Also available in custom colors.
CONDENSATE DRAIN KIT Attaches to the bottom
of the wall sleeve for internal draining of condensate
or to the rear wall sleeve flange for external draining.
Recommended on all units to remove excess condensate.
Packaged in quantities of ten.
DEEP WALL SLEEVE EXTENSION A four inch deep
anodized aluminum extension that attachesto the outside
of the wall sleeve when the wall is greater than 13¼" thick
(11¾" when a subbase is used, 12¼" when a lateral duct
is used).
DECORATIVE SUBBASE Provides unit support for
walls less than six inches thick. Includes leveling legs,
side filler panels and mounting brackets for electrical
accessories. Accepts circuit breaker, power disconnect
switch and conduit kit.
CONDUIT KIT WITH JUNCTION BOX Hard wire conduit
kit with junction box for 208/230V and 256V units
(subbase not required). Kit includes a means of quick
disconnect for easy removal of the chassis. *Required
for 265V installations.
DESK CONTROL KIT A field installed kit which allows
the unit to be turned on or off from a remote central
station via a 24V interface. This kit is compatable with
all chassis models.
PXWS
PXDB
PXDRIO
PXWE
PXCJ
PXDC ;_
8
Loading ...
Loading ...
Loading ...