Loading ...
Loading ...
Loading ...
Attaching a Lanyard
1 Insert the loop of the lanyard through the slot in the device.
2 Thread the other end of the lanyard through the loop, and pull it tight.
3 If necessary, attach the lanyard to your clothing or backpack to tether it during an activity.
Locking and Unlocking the Buttons
You can lock the buttons to prevent inadvertent button presses.
1 Press to open the power menu.
2 Select Lock Buttons.
3 Press to unlock the buttons.
Device Care
NOTICE
Avoid chemical cleaners, solvents, and insect repellents that can damage plastic components and finishes.
Do not store the device where prolonged exposure to extreme temperatures can occur, because it can cause
permanent damage.
The device is water resistant to IEC Standard 60529 IPX7. It can withstand accidental immersion in 1 meter of
water for 30 minutes. Prolonged submersion can cause damage to the device. After submersion, be certain to
wipe dry and air dry the device before using or charging.
Thoroughly rinse the device with fresh water after exposure to chlorinated or salt water environments.
Cleaning the Device
1 Wipe the device using a cloth dampened with a mild detergent solution.
2 Wipe it dry.
After cleaning, allow the device to dry completely.
Troubleshooting
Maximizing Battery Life
• Reduce the backlight timeout (System Settings, page19).
• Reduce the frequency of the tracking Send Interval setting (Tracking Settings, page18).
• Use the Standard level of detail for activity recordings (Tracking Settings, page18).
• Turn off Bluetooth wireless technology (Phone Settings, page19).
• Turn off ANT+ wireless technology (inReach Remote Settings, page19).
22 Device Information
Loading ...
Loading ...
Loading ...