Loading ...
Loading ...
Loading ...
www.SereneLifeHome.com 4
GETTING STARTED
SUP BOARD MR PUMP
Your SUP Board comes with a high pressure pump. This pressure pump, pumps low volume of air with each pumping
motion. It takes longer to ll the board with air, but allows the board to reach a higher air pressure. This is good for achieving
maximum performance from the board.
The SUP board air pump is also lubricated with oil. To ensure the life of the air pump, make sure the pump is fully lubri-cated
before and during each use. To lubricate the pump, simply open the top and place a few drops of oil/grease on the gasket
and tube. Take a second to clean the air lter, also located inside the top of the pump.
INSTALLING THE FIN
Make sure the center n box is clean and free of debris.
Put n base into n
box from the wide inlet.
1 2 3 4 5
Push the n down Turn the screw to secure
n rmly.
The n base will
slide to the end of
box at the same time.
Loading ...
Loading ...
Loading ...