Loading ...
Loading ...
Loading ...
10
www.linarie.com.au
13. TROUBLESHOOTING
If your device shows the other symptoms that those
described below, please call the service after sale
of the shop a retailer.
The appliance
does not work.
There is no
power supply.
The fuse
doesn’t work.
Replace the fuse.
Check the plug
connecting it others
appliance, or verify that
the appliance is
connected to the plug.
The appliance
makes a lot
of noise.
The appliance
is too close to
the wall, or is
not stable, or
the accessories
inside the
refrigerator
are placed in
wrong position.
Stabilize the base of the
refrigerator by adjusting
the position of feet, take
away the device of the
wall, place correctly the
accessories inside the
refrigerator.
The appliance
doesn’t cool
enough.
The door is too
often opened
or was left
opened for a
long time.
The refri
gerator
is too close to
the wall.
Close the door and do
not open it too much
frequently.
Take away the device
of the wall to favor the
ventilation.
Remove food of the
device.
Symptom Cause Solution
The refrigerator
is too full.
The appliance
doesn’t cool
enough.
The tempera-
ture is badly
adjusted.
Turn the knob of regu-
lation of temperature on
"3" or more
There are
smells in the
appliance.
The noise of the cooling liquid which circulates in pipes
can be heard, it is normal.
The humidity on the surface outside of the device during
the wet seasons is not a problem of the device; you just
need to wipe it with a dry soft cloth.
The compressor and the condenser can warm more
during the periods of strong heat.
The frame of the door is a bit hot; it means that the
condenser works to evacuate the humidity of air.
The following symptoms are not breakdowns:
Food made
obsolete inside
the refrigerator.
Throw away obsolete
food and wrap the other.
The
inside of
the device at
need to be
cleaned.
Clean the inside of the
refrigerator.
Symptom Cause Solution
12. COLDEST ZONE IN THE REFRIGERATOR
This symbol indicates the location of the coldest zone
of the refrigerator, The area is bounded below by the
glass crisper, and above by the symbol or the rack
positioned at the same height.
To ensure the temperatures in this area, do not change
the positioning of the shelf. In forced air refrigerators
(equipped with a fan or No Frost models), the symbol
of the coldest zone is not represented because the
temperature inside is homogeneous.
To help you set your refrigerator well, it is equipped
with a temperature indicator that will monitor the
average temperature in the coldest zone.
Temperature indicator setting
This indicator is intended to work only with your
refrigerator, do not use it in another refrigerator
(in fact, the coldest zone is not the same),
or for any other use.
WARNING:
With the temperature indicator, you can check regularly
that the temperature of the coldest zone is correct.
Indeed, the internal temperature of the refrigerator depends
on several factors such as the ambient temperature of the
room, the amount of food stored and the frequency of door
opening. Take these factors into consideration when setting
the device. When the indicator shows « OK », this means
that your thermostat is well adjusted and the internal
temperature correct.
If the indicator of temperature turns WHITE, this
means that the temperature is too high; in this case,
increase the refrigerator temperature control setting
and wait for 12 hours before performing a new
visual inspection of the indicator.
When fresh food has been introduced or the door
has been left open, it is possible for the indicator
of temperature to turn WHITE after a while.
Checking the temperature in the coldest zone
Loading ...
Loading ...
Loading ...