Loading ...
Loading ...
Loading ...
OVEN VENT LOCATED
UNDER LEFT REAR ELEMENT
Removing & Replacing Oven Racks
Oven Vent Location
For models equipped with coiled surface elements, the oven vent islocated under
the left rear surface element. When the oven ison, warm air flows through the
left rear element. This venting is necessary for proper air circulation inthe oven
and good baking results. DO NOT BLOCK THE OVEN VENT.
Arranging Oven Racks
ALWAYS ARRANGE OVEN RACKS WHEN THE OVEN IS COOL (PRIOR TO
OPERATING THE OVEN). Always use oven mitts when using the oven.
To remove, pull the rack forward until itstops. Lift up front of rack and slide out. To replace, fit the rack onto the guides on
the oven walls. Tilt the front of the rack upward and slide the rack back into place.
Rack RECOMMENDED RACK POSITIONS FOR
positions BROILING, BAKING & ROASTING
Food Rack Position
Broiling meats, chicken or fish 1,2 or 3
Cookies, cakes, pies, biscuits & muffins 3 or 4
Frozen pies, angemfood cake, yeast, bread, 5
casseroles, small cuts of meat or poultry
Turkey, roast or ham 5
Setting Ciock & Minute Timer (some models '
Models with no Clock
If your model has no Clock or Minute Timer, clock settings are not required to operate your range. Please proceed to Setting
Surface & Oven Controls in this Use & Care Manual.
HOUR
A C CLOCK
MmNUTE TmMER
Note: The 3 button clock graphics shown vary by model.
To Set the 3 Button Minute Timer
1.
To Set the 3 Button Clock (some models)
When the range is first plugged in, or when the power supply to
the range has been interrupted, "12:00" will flash in the display
window.
1. Slide switch C (CLOCK/TIMER) to the CLOCK position.
2. Push in and hold button A (HOUR) until the correct hour
appears inthe display. (The numbers will only count forward.)
3. Push in and hold button B (MINUTE) until the correct
minutes appear in the display.
Slide switch C (CLOCK/TIMER) to the TIMER position, "0:59" (59 MINUTES) will appear inthe display window. The timer
can be set for any amount of time from 1 minute to 1 hour and 59 minutes.
2. • To set a time more than 59 minutes, push in and release button A (HOUR). The display will show the maximum 1 hour
and 59 minutes. The time can now be adjusted down by pushing in and holding button B (MINUTE) until the correct
time appears in the display window.
To set a time less than 59 minutes, push in and hold button B (MINUTE) until the correct minutes appear in the display.
(The minute timer will automatically start when the button is released.)
3. When the set time has passed, the control will display "0:00" and beep continuously. Slide switch C (CLOCK/TIMER)
to the CLOCK position to cancel the timer and return to the clock mode.
Loading ...
Loading ...
Loading ...