Loading ...
Loading ...
Loading ...
Necessary element conversion parts are located in a small bag
contained within the electrical junction box on top of the water
heater.
CONVERSION PARTS
BUSS BAR
1,
FIGURE 12.
Before beginning the conversion turn "OFF" electric power
supply to the water heater.
4,
Lower Element: Lift out the tab as shown to unctip the
terminal cover from the thermostat. The terminal cover can
now be removed from the thermostat.
LIFTOUT TABTO UNCLIP
TERMINAL COVER FROM
THERMOSTAT
TURN OFF
POWER
BEFORE
SERVING
COVER
TO REMOVE
PULLARROW
AT TOP OF
2,
FIGURE 13.
The convertible element is located behind the lower access
panel of the water heater. Remove the screw securing the
access panel, then remove the panel.
FIGURE 16.
5. Remove the screws from terminal 2 of the element, and
move the looped end of the wire aside.
3,
J
'tf_
FIGURE 14.
Fold the insulation back to expose the terminal cover.
6,
7,
FIGURE 17.
The buss bar is labeled 5500 W. Place the buss bar over
terminals 2 and 3 with the 5500 W visible. Install the extra
screw provided into terminal 3.
FIGURE 18.
The wire removed from terminal 2 has a looped end. It must
remain looped and now be placed (as shown) on top of the
buss bar, over the opening of terminal 2, and secured using
the remaining screw.
FIGURE 15.
14
FIGURE 19.
Loading ...
Loading ...
Loading ...