Loading ...
Loading ...
Loading ...
AboutCustomCooU GEAppliances.com
How it Works
The CustomCoolTM fizamre is a system of
dampers, a fan, a temperature thermistor
and a heatel: Depending on the traction
selected, a combination of these will be
used to quickly chill items, thaw items or
hold the pan at a specific temperature.
The pan is tightly sealed to prevent tile pan's
temperature fi'om causing temperature
fluctuations in the rest of the refrigeraton
The controls for this pan are located at the
top of the refrigerator with the temperature
controls.
ExpressThawTM
ExpressChillTM
How to Use
0
@
Empty the pan. Place the Chill/Thaw
tray in the pan. Place the items on the
tray and close the pan completely.
Select the ExpressThawff ExpressChillTM
or SelectTempTM pad. The display and
SETlight will come on. Tap the pad
until the light appears next to the
desired setting. Use the chart to
determine the best setting to use.
/}_5To stop a fizature before it is
finished, tap that feature's pad
until no options are selected and
the display is ore
I;}5During Expre,_ Yhaw" and
ExpressChillffthe display on the
controls will count down the time
in the cycle.
/}55After the ExpressYhaw_cycle is
complete, the pan will reset to the
MEATsetting (31°F) to help preserve
thawed items until they are used.
/;55The displayed actual temperature of
the CustomCoolpanmayvary slightly
from the SETtemperature based on
usage and operating emdronment.
NOTE."For J[bod safety reasons, it is
recommended that foods be wrapped
in plastic wrap when using F_xpressThawJ"
This will help contain meat juices and
improve thawing performance.
How to Remove and Replace the Drawer
TOremove:
Pull the drawer out to the stop position.
Lift the front of the drawer tip and out
of the wire holder.
Lift the hack of the drawer tip and out.
Toreplace:
Place the back of the drawer in the wile
holder, making sure the wire holder
fits into the grooves on the back of
the pan.
Lower the front of the drawer into the
wire holden
Pull the bottom of the wire holder
[}orward until the wire pops into the
groove located on the bottom of
the drawer.
Loading ...
Loading ...
Loading ...