Loading ...
Loading ...
Loading ...
Installation and Assembly cont.
Pedestal Models
Reference the gure below when installing your pedestal electric grill.
1. Using a Phillips-head screwdriver, remove the 4 screws and bumpers on the bottom of the grill.
Discard the bumpers. Align the electric grill onto the top of the post assembly. Using the same 4
screws, fasten the electric grill to the post assembly.
2. The post assembly base must be securely fastened to a stable, level surface using the lag screws
and shields (not supplied) to ensure the grill remains fixed and upright at all times.
Side Shelf Instructions.
1.Using 3 screws, align and fasten each shelf bracket to the side of the grill.
2. Holding the shelf horizontally, align the slots on the shelf with the pin on the bracket and slide shelf
into position.
3. Repeat for the opposite side.
Note* The shelf is a 2-position shelf: 1. Raised and 2. Lowered
Important: BEFORE USE, the grill base must be securely fastened to a stable, level surface to
ensure the grill remains xed and upright at all times.
Locate the patio mount base in the planned grill location and mark the 4 holes. Drill the marked
holes to a 1/2” diameter x 1 1/2” depth. Insert the lag shields (not supplied) into the holes, ensure
that they are ush with the ground.
Align the holes on the patio mount base over the lag shields (not supplied) in the ground. Secure
the base with the lag screws (not supplied) using a 7/16” nut driver.
A. Bolt holes for bolting pedestal to
the ground
A. Bolt holes for bolting
pedestal to the ground
10
Loading ...
Loading ...
Loading ...