Ancona UCT636 Product Manual:

Loading ...

— 13 —

Installation

STEP 10

Install Filters

To install lters, follow four steps below (See Fig #4):

• Angle the lter into slots at the back of the hood.

• Push the button on handle of the lter.

• Release the handle once the lter ts into a resting position.

• Repeat to install all lters.

Cleaning Filters

IMPORTANT: Drain oil from bafes, spacers, lters, oil tunnels, oil containers before oil and residue overow!

• Remove all bafes, spacers, lters, grease tray, and oil containers and discard oil and residue.

• Wash with warm soapy water. NOTE: Stainless steel bafes, spacers and oil tunnel are top rack dishwasher safe.

• Dry thoroughly before replacing and follow directions for installation in reverse.

• Filters should be cleaned after every 30 hours of use.

• Should lters wear out due to age and prolonged use, replace with a new lter.

Fig #4

Loading ...

Ancona UCT636 36 in. Under Cabinet Range Hood with Night Light Feature