Loading ...
Loading ...
Loading ...
Important Safety
Instructions {continued)
Avoid fire hazard or
electrical shock. Do not use an
adaptor plug or extension cord or
remove grounding prong from
electrical power cord. Failure to
follow this warning can cause serious
injury, fire or death.
Grounding type
wall receptade
notunderany
circumstances, cut,
remove, or bypass the I
grounding prong
om,hisplug /
Power supply cord with 3-prong
grounding plug
CORRECT
Use this way ONLY
Do not use or mix
fiquid chlorine bleach with other
household chemicals such as toilet
cleaners, rust removers, acid or
products containing ammonia. These
mixtures can produce dangerous
fumes which can cause serious injury
or death.
Prevent injury
To prevent shock hazard and assure stability during operation, the
washer must be installed and electrically grounded by a qualified service person in
accordance with local codes. Installation instructions are packed in the washer for
installer's reference. Refer to INSTALLATIONINSTRUCTIONSfor detailed grounding
procedures. Ifthewasher ismoved to a new location, have itchecked and reinstalled
by a qualified service person.
_To prevent personal injury or damage to the washer, the electrical
power cord of the washer must be plugged into a properly grounded and polarized
3-prong outlet. The third grounding prong must never be removed. Never
gro und the washer to a gas pipe. Do not use an extension cord or an adap tor
plug.
Follow package directions when using laundry products. Incorrect
usage can produce poisonous gas--resulting in serious injury or death.
• Donotcombinelaundryproductsforusein 1Ioadunlessspecifiedonthelabel.
• Do not mix chlorine bleach with ammonia or acids such asvinegar.
_To prevent serious personal injury and damage to the washer:
• All repairs and servicing must be performed by an authorized servicer
unless specifically recommended in this Owner's Guide. Use only authorized
factory parts.
Do not tamper with controls.
Do not install or store the washer where it will be exposed to the weather.
Do not install on carpet. Install washer on a solid floor. It may be necessary to
reinforce the floor to prevent vibration or movement.
To reduce the risk of electric shock, disconnect this appliance from
the power supply before attempting any user maintenance. Turning the controls to
the OFFposition does not disconnect this appliance from the power supply.
To prevent injury, do not reach into the washer while parts are
moving. Before loading, unloading or adding items, push in the cycleselector knob
and allow the drum to coast to a complete stop before reaching inside.
Failure to comply with these warnings could result in serious personal injuries.
Thiswasher isequipped with an electrical overload protector. The motor will stop
if it becomes overheated. The washer will automatically restart after a cool down
period of up to 30 minutes, if the washer has not been manually turned off during
this time.
SAVE THESE INSTRUCTIONS
Note: Theinstructions appearing inthis
Owner's Guide are not meant to cover
every possible condition and situation
that may occur. Common sense and
caution must be practiced when
installing, operating and maintaining
any appliance.
Loading ...
Loading ...
Loading ...