Loading ...
Loading ...
Loading ...
M2 IEBT | 15
Getting started
Pairing the headphones with a Bluetooth device using NFC
The following sections describe, using a smartphone as an example, how to pair
your M2 IEBT In-Ear Wireless headphones with a Bluetooth device using NFC. If
the instructions provided do not work on your device, proceed as described in
the instruction manual of the device.
You can pair the headphones with other devices using NFC regardless of the
headphones’ power state (on or off).
1. Activate NFC on your smartphone.
2. Scan the smartphone to the NFC panel on the neckband, see NFC panel
location on page 7.
You hear the voice prompt “power on” and a beep sound. The LED flashes
blue and red.
At this point, if you decide to cancel pairing, press the play/pause button
once. The headphones go to idle mode.
3. Click “Yes” if the pairing confirmation dialog appears on the screen of your
smartphone (this step may vary depending on your smartphone).
If pairing was successful, the neckband vibrates and you hear the voice
prompt “connected”. The LED flashes blue 3 times.
Menu
NFC on
NFC off
scan
1s 1s
Connect to Bluetooth device?
Yes
No
› connected ‹
1 2
3
Loading ...
Loading ...
Loading ...