Loading ...
Loading ...
Loading ...
WARNING: To reduce the risk of re, electric shock, or injury to persons, read the IMPORTANT SAFETY INSTRUCTIONS
before operating this appliance. The following is a guide to using your dryer.
Please refer to specic sections of this manual for more detailed information.
NOTE: This Use and Care Guide covers several different models. Your dryer may not have all of the cycles and features described.
QUICK START GUIDE
START
1. Clean the lint screen before each load.
2. Place laundry in dryer and shut door.
3. Press POWER.
4. Select AUTOMATIC or MANUAL cycle.
5. Select OPTIONS and/or CYCLE SIGNAL, if desired.
See “Additional Features.”
6. Press and Hold START/PAUSE to begin.
MANUAL CYCLES
Use Manual Cycles to set a drying time
and temperature.
1. Press POWER.
2. Turn knob to desired Manual Cycle.
3. Press TIME ADJUST up or down arrow buttons until the
desired drying time is displayed.
4. Press TEMP until the desired temperature illuminates.
NOTE: During the Manual Cycle, you can change the
settings for Time, Temp, the WRINKLE SHIELD™ feature,
and Cycle Signal.
5. Press and Hold START/PAUSE.
TIMED DRY - Use this cycle if items are still damp after an
Auto cycle.
QUICK DRY (on some models) - Use this cycle for drying
small loads or items requiring a short drying time.
TOUCH UP (on some models) - Use this cycle to help
smooth out wrinkles from clean, dry clothes.
Automatic Cycles match the cycle setting to the type
of load, and adjust Dryness Level for optimal performance.
See “Automatic Preset Cycle Settings Chart.”
1. Press POWER.
2. Turn knob to desired Automatic Cycle.
3. Select DRYNESS LEVEL to adjust how dry you
want the load.
4. Select OPTIONS.
5. Press and Hold START/PAUSE.
To make changes to the Dryness Level:
NOTE: Dryness selections can be made only while using
Automatic Cycles.
1. Press START/PAUSE once.
2. Select DRYNESS LEVEL.
3. Press and Hold START/PAUSE.
AUTOMATIC CYCLES
STOPPING, PAUSING, OR RESTARTING
To stop or pause
Open the door or press START/PAUSE once.
Press START/PAUSE twice to cancel a cycle.
To restart
Close the door. Press and Hold START/PAUSE.
STEAM CYCLES
(Steam models only)
Steam Cycles use water and heat to reduce
wrinkles and odors in dry items. See “Cycles”
for more details on each cycle.
1. Press POWER.
2. Select ENHANCED TOUCH UP or QUICK REFRESH 1-4
or 5-8 Garments cycle.
3. Press TIME ADJUST up or down until the desired drying
time is displayed (only on Enhanced Touch Up Cycle).
4. Press TEMP until the desired temperature illuminates.
5. Press and Hold START/PAUSE.
5
Loading ...
Loading ...
Loading ...