Loading ...
Loading ...
Loading ...
Page 9
ASSEMBLY
LINE TRIMMER CUT-OFF BLADE
The trimmer is equipped with a line trimming
cut-off blade on the guard. Replace the string
when trimming efciency diminishes. This will
maintain best performance.
Adjusting the cutting swath
The attachment connects to the power head
by means of a coupler device.
1. Loosen the attachment knob on the
coupler.
2. Push in the release button located on the
attachment shaft. Align the button with the
guide recess on the power head coupler
and slide the two shafts together. Rotate the
attachment shaft until the button locks into
the positioning hole.
NOTE:
If the button does not release
completely in the positioning hole, the shafts
are not locked into place. Slightly rotate from
side to side until the button is locked into
place.
3. Tighten the attachment knob securely.
To remove the attachment to the power
head
For removing or changing the attachment:
1. Stop the power head.
2. Remove the battery from the power head.
3. Loosen the attachment knob.
4. Push in the release button and twist the
shafts to remove and seperate ends.
AUXILIARY HANDLE
1. Press the auxiliary handle onto the power
head shaft so that the handle is angled
toward the rear handle that allows for
comfortable operation.
2. Slide the bolts through the holes in
the auxiliary handle, and tighten them
securely with a Phillips Head screwdriver
(not included).
Loading ...
Loading ...
Loading ...