Loading ...
Loading ...
Loading ...
11
Time programming function
This function may be used in two different ways:
■ to automatically switch off a hotplate.
■ as a timer.
A hotplate should switch off automatically
The hotplate switches off automatically after the time that is set
has elapsed.
Setting procedure
The hob must be switched on.
1. Select the hotplate and the required heat setting.
2. Touch the 0 symbol. x lights up in the display for the
hotplate.
‹‹ appears in the timer display.
3. Within the next 10 seconds, select the required cooking time
on the settings range.
The cooking time begins to elapse.
Notes
■ The same cooking time can be set automatically for all
hotplates. The set time for each of the hotplates counts down
independently.
The Basic settings section contains information on
automatically programming the cooking time.
■ If the combi zone or move function is selected when the
hotplates are combined, the set time is the same for both
hotplates.
Changing or cancelling the time
Select the hotplate and then press the
0 symbol.
Change the cooking time using the programming zone or set
to
‹‹ in order to cancel the time.
Once the time has elapsed
The hotplate switches off. A warning signal sounds. The time
program function lights up
‹‹ for 10 seconds in the display.
When the
0 symbol is pressed, the indications turn off and the
beeping stops.
Notes
■ To program a cooking time of less than 10 minutes, always
press 0 before selecting the desired value.
■ If cooking times have been programmed for various zones,
the time program function always displays the time of the
selected hotplate.
■ Cooking times can be programmed for up to 99 minutes.
The timer
The timer can be set for periods of up to 99 minutes. It is
independent of the other settings. This function does not
automatically switch off a hotplate.
How to program
1. Press the 0 symbol until the U indicator lights up. ‹‹ lights
up in the time program function display.
2. Adjust the desired time in the programming zone.
The time starts to count down again after a few seconds.
Changing or cancelling the time
Press the
0 symbol and the U indicator lights up.
Change the cooking time in the programming zone or press 0
to cancel the time.
Once the time has elapsed
Once the time has elapsed, a beep will sound.
‹‹ and Uare
displayed in the time program function display. After pressing
the
0 symbol, the indications turn off.
Cleaning lock function
Cleaning the control panel while the hob is switched on may
change the settings.
In order to avoid this, the hob has a cleaning lock function.
Press the
> symbol. A signal sounds. The control panel is
locked for 35 seconds. The control panel surface can now be
cleaned without the risk of changing the settings.
Note: The lock does not affect the main switch. The hob may
be turned off when desired.
Loading ...
Loading ...
Loading ...