Loading ...
Loading ...
Loading ...
Care and Cleaning
Usecare with laundry
products. They can damage finish on
the washer.
Inside
• Remove items from the washer assoon asthe cycleends. Excesswrinkling, color
transfer, and odors may develop in items left in the washer.
• Dry the washer top, the area around the lid opening, and the underside of the
lid. These areasshould always be dry before the lid isclosed.
* Before cleaning the washer interior, unplug the electrical power cord to
avoid electrical shock hazards.
• When extremely soiled items have been washed, a dirty residue may remain on
the tub. Removethis bywiping the tub with anonabrasive household cleanser.
Rinse thoroughly with water.
• Theagitator or tub may become stained from fabric dye. Clean these partswith
a nonabrasive household cleanser. This prevents dye transfer to future loads.
Outside
• When washing iscompleted, wipe top and sides of washer with a damp cloth.
Turn water faucets off to prevent pressure build-up in the hoses.
As needed, clean the cabinet with mild soap and water. Never use harsh,
gritty or abrasive cleansers. Iftop or lidbecomes stained, clean with diluted
chlorine bleach [1/2 cup (120 ml) in 1 quart (.95 L) water]. Rinseseveral times
with clear water.
• Remove glue residue from tape or labelswith a mixture of warm water and mild
detergent. Or, touch residue with the sticky side of the tape or label.
° Before moving the washer, placeastrip of cardboard or thin fiberboard under
the front leveling legsto prevent floor damage.
Follow Winterizing
Instructions for cold
weather care.
Winterizing Instructions
If the washer isstored in an area where freezing can occur or moved in freezing
temperatures, follow these winterizing instructions to prevent damage to the
washer:
1. Turn off water supply faucets.
2. Disconnect hoses from water supply and drain water from hoses.
3. Plug electrical cord into a properly grounded electrical outlet.
4. Add 1gallon nontoxic recreational vehicle (RV)antifreeze to empty wash tub.
Close lid.
5. Set cycle selector knob at a spin setting. Pull out knob and let washer spin for
1 minute to drain out all water. Not all of the RVantifreeze will be expelled.
6. Push in knob, unplug electrical power cord, dry tub interior, and close lid.
7. Store washer in an upright position.
8. To remove antifreeze from washer after storage, run empty washer through a
complete cycle using detergent. Do not add wash load.
Loading ...
Loading ...