Loading ...
Loading ...
Loading ...
13
English
English
Detachable
parts
When to clean How to clean
Brew group Weekly Remove the brew group from the machine (see
'Removing and inserting the brew group'). Rinse it
under the tap (see 'Cleaning the brew group under
the tap').
Classic milk frother After every use First dispense hot water with the milk frother
attached to the machine for thorough cleaning.
Then remove the milk frother from the machine and
disassemble it. Clean all parts under the tap or in the
dishwasher.
Pre-ground coffee
compartment
Check the pre-ground coffee
compartment weekly to see if
it is clogged.
Unplug the machine and remove the brew group.
Open the lid of the pre-ground coffee compartment
and insert the spoon handle into it. Move the
handle up and down until the clogged ground
coffee falls down (Fig. 28). Go to
www.philips.com/coffee-care for detailed video
instructions.
Coffee grounds
container
Empty the coffee grounds
container when prompted by
the machine. Clean it weekly.
Remove the coffee grounds container while the
machine is switched on. Rinse it under the tap with
some washing-up liquid or clean it in the
dishwasher. The front panel of the coffee grounds
container is not dishwasher-safe.
Drip tray Empty the drip tray daily or as
soon as the red 'drip tray full'
indicator pops up through the
drip tray (Fig. 29). Clean the
drip tray weekly.
Remove the drip tray (Fig. 30) and rinse it under the
tap with some washing-up liquid. You can also clean
the drip tray in the dishwasher. The front panel of
the coffee grounds container (fig. A15) is not
dishwasher-safe.
LatteGo After every use Rinse LatteGo under the tap or clean it in the
dishwasher.
Lubrication of the
brew group
Every 2 months Consult the lubrication table and lubricate the brew
group with the Philips grease (see 'Lubricating the
brew group').
Water tank Weekly Rinse the water tank under the tap
Cleaning the brew group
Regular cleaning of the brew group prevents coffee residues from clogging up the internal circuits. Visit
www.philips.com/coffee-care for support videos on how to remove, insert and clean the brew group.
Cleaning the brew group under the tap
1 Remove the brew group (see 'Removing and inserting the brew group').
2 Rinse the brew group thoroughly with water. Carefully clean the upper filter (Fig. 31) of the brew group.
3 Let the brew group air-dry before you place it back. Do not dry the brew group with a cloth to prevent
fibers from collecting inside the brew group.
Loading ...
Loading ...
Loading ...