Loading ...
Loading ...
Loading ...
F,LL,NDATES
AS YOUCOMPLETE ,%_O_ _,._ _._ ,_ _._ _,R" _O
R EGU LAR SERVICE /__SVICE DATE S
c::;:
Check Operator Presence and
T BOSSystems I_
R Check for Loose Fasteners _ It_ I_
A Sharpen/Replace Mower Blades 1_3
Lubrication Chart If
0 Check Battery Level _4
R Clean Battery and Terminals If I_
v"Check Transaxle Cooling
Check V-Belts
Check Engine OilLevel If
Change Engine Oil (with oil filter) _.2 I_
E Change Engine Oil (without oil filter) _._ tf
N C,eanAirFilter _i
G Clean Air Screen
Inspect Muffler/Spark Arrester
E Replace Oil Filter (If equipped) 11_2
Clean Engine Cooling Fins 1_2
Replace Spark Plug _"2 I1_
Replace Air Filter Paper Cartridge
Replace Fuel Filter I_
1 - Change more often when operating under a heavy load or
in high ambient lempei'atures.
2 - Service more often when operating in dirty or dusty conditions.
3 - Replace blades more often when mowing in sandy soil.
4 - Not required if equipped with maintenance-free battery.
5 - Tighten front axle pivot bolt 1o35 fbdbs, maxhnum.
Do not overtighten.
GENERAL RECOMMENDATIONS
The warranty on this tractor does not
cover items that have been subjected to
operator abuse or negligence. To receive
full value from the warranty, operator
must maintain tractor as instructed in this
manual.
Some adjustments will need to be made
periodically to properly maintain your
tractor.
At least once a season, check to see if
you should make any of the adjustments
described in the Service and Adjustments
section of this manual.
• At least once a year you should replace
the spark plug, clean or replace air filter,
and check blades and belts for wear.
A new spark plug and clean air filter
assure proper air-fuel mixture and help
your engine run better and last longer.
BEFORE EACH USE
1. Check engine oil level.
2. Check brake operation.
3. Check tire pressure.
4. Check operator presence and
ROS systems for proper operation.
5. Check for loose fasteners.
LUBRICATION CHART
_ Spindle _f'_ ......... _ @_ Spindle
\_J Front <>,.q . _ £2) Front Wheel
Wheel !-:/ _ Bearing zerk
Bearing _--- .
zerk /'_ I ':_;
.... _.................../ line
" _ °_ Pivots
_SAE 30 or 10w30 Motor Oil
General Purpose Grease
Refer to Maintenance "ENGINE" Section
IMPORTANT: Do not oil or grease the
pivot points which have special nylon
bearings. Viscous lubricants will attract
dust and dirt that will shorten the life of
the self-lubricating bearings. If you feel
they must be lubricated, use only a dry,
powdered graphite type lubricant spar-
ingly.
18
Loading ...
Loading ...
Loading ...