Rotel T11B Owner's Manual

Loading ...

English

Specications

FM Tuner

Usable Sensitivity 22.2 dBf

50dB Quieting Sensitivity 27.2 dBf (mono)

Signal to Noise Ratio (at 65 dBf)

MONO 63 dBf

STEREO 60 dBf

Harmonic Distortion (at 65 dBf)

MONO 0.2%

STEREO 0.3%

Frequency Response 10Hz - 15kHz, ± 3dB

Stereo Separation 40dB/ 37dB

(100Hz/1kHz)

Output level 1.0 V

Antenna Input 75 ohms F connector

DAB Tuner

Sensitivity -80 dBm

Tuning Range Band III (174 - 240MHz)

Audio Data Rate 224kbps (Max)

Frequency Response 20 - 20k Hz +/- 1.0 dB

Analog Output 2.1V at 0 dBFS

Antenna Input 75 ohms F connector

General

Power Consumption 10 watts

Standby Power Consumption ＜ 0.5 watts

BTU (at 5 watts) 17 BTU/h

Power Requirements (AC)

USA: 120V, 60Hz

Europe: 230V, 50Hz

Dimensions (W x H x D) 430 x 73 x 330 mm

(17 x 2

/8 x 13 in)

Front panel height 60 mm

Weight (net) 4.3 kg (9.48 lbs)

All specifications are accurate at the time of printing.

Rotel reserves the right to make improvements without notice

Rotel and the Rotel Hifi logo are registered trademarks of The Rotel Co.,

Ltd. Tokyo, Japan.

Troubleshooting

Most difculties in audio systems are the result of incorrect connections, or

improper control settings. If you encounter problems, isolate the area of the

difculty, check the control settings, determine the cause of the fault and

make the necessary changes. If you are unable to get sound, refer to the

suggestions for the following conditions:

Power Indicator Is Not Illuminated

The power Indicator should be illuminated whenever the unit is plugged

into the wall power outlet and the power button is pushed in. If it does not

light, test the power outlet with another electrical device, such as a lamp.

Be sure the power outlet being used is not controlled by a switch that has

been turned off.

No Sound

Check the cables between the output and the pre-amplier inputs, be sure

they are connected properly. Refer to Fig. 3.

Cannot Tune to DAB/DAB+ Preset Station

Some stations may become unavailable and will be displayed in the Station

List with a “?” character in front of the station name. These stations are

no longer broadcasting or received by the T11 unit. Presets that are set

to these stations will not function and if selected the T11 unit will display

the DAB menu. To remove stations no longer transmitting use the PRUNE

function in the DAB Menu. This will remove these stations from the Station

List and from the Preset list.

Loading ...

Rotel T11B

Owner's Manual - Page 11