Loading ...
Loading ...
Loading ...
button to increase delay-time, set the figure timers as the time you want, max delay-time is 15 minutes.
If time-setting changes from A6 button to A5 button, during the process, speed changes,but does not affect count down.
Off immediately
Press A1 button two times, fan turn off immediately.
Bulb control
Press A2 button once, turn on the lights, and again to turn off.
Press A2 button or A4 button, then will not able to turn on LED light.
Warning: In case of any scald, do not touch LED light, unless hood is closed or cooled.
A0 button: same as above.
Remote sensor: A0 is the remote control.Remote sensor to receive infrared (IR) remote control signal.
HRH3002U operating instruction as following:
Function Button: LED light button F1 low speed F2 medium speed F3 high speed F4 time-delay/on-off F5
Light Button: Power on, press F1 button once, turn on the lights, and again to turn off.
Fan button: When need to open the hood, turn on the power, press F2 button ( low speed) F3 button (medium speed)
F4 button(high speed)
Time-delay Button: Power on, press any button of F2/F3/F4, fan starts and F5 light automatically but does not blink.
Press F5 again, time-delay function starts, when F5 indicator light starts to blink, time-delay function unadjustable,
default setting time is 5 minutes. Press F5 button again, time-delay and fan both close, LED light still on, which is independent
switch.
Loading ...
Loading ...
Loading ...