Loading ...
Loading ...
Loading ...
15
EN
5) Pull out the hand-truck, tilt the range laterally and insert the legs.
6) After the electrical and gas connections (see both paragraphs for instructions) measure the four corners in cutout
area to verify if flooring is level. Adjust the leveling legs to the desired height and ensure range is level. Turn the
bottom section of each leg counter-clockwise to raise the leg and clock wise to lower it. Ensure floor is protected and
slide unit into place making sure to engage the anti-tip bracket.
7) The kickplate should be assembled under the oven door. In the front side of range there are threee holes and two slots.
To Hook the kickplate to the range, insert the two clips in the two slots, as follows:
The kickplate can be fixed to range by three srews included inside the range. See below:
Loading ...
Loading ...
Loading ...