Loading ...
Loading ...
Loading ...
Special function
Cleaning and maintenance
Program memory function
When the Health-care Beverage Maker is functioning, it can be paused by lifting the kettle body or
press the 'Start/Pause' button, the program can be resumed if the kettle is put back on the power
base or by pressing the 'Start/Pause' button within 1 hour and it will not start from the beginning
again.
Avoid false operation
-The function mode can be arbitrarily switched within one minute after the selected function
starts to work.
-The function cannot be arbitrarily switched after one minute's work of the Health-care
Beverage Maker to avoid unintentional operations. Press the 'Start/Pause' button if you
need to switch function and the button will start falshing, then select the needed program.
Cold water protection
-If the cold water is added to the kettle while the Health-care Beverage Maker is working, besides
the 'Milk' and 'Yoghurt' function, the Health-care beverage maker will automatically re-boil the
water and then implement the program that has not been completed.
Cleaning and maintenance
Cleaning of the Health-care Beverage Maker
1. Unplug the power cord.
2. Use a wet sponge to clean the internal part after the Health-care Beverage Maker is
completely cooled.
Caution: do not immerse the kettle, the base, the power cord or the plug in the water (the
electronic connector on the bottom of the kettle and the power base should be kept
away from water).
3. Please clean in time after every use to avoid food deterioration.
Descaling
A regular scaling is needed for the Health-care Beverage Maker(at least once a month), and
the times should be increased if the water quality is not good.
It belongs to the normal phenomenon for a spot appears on the heating plate, which is the
scale and can be cleaned by using a clean cloth to scrub gently. The following ways can
be used for descaling in case of worse situations.
Tips for descaling of the Health-care Beverage Maker
Use white vinegar:
- Add appropriate amount of white vinegar into the Health-care Beverage Maker.
- Leave it for 1 hour without heating.
- Empty the kettle and wash it for 5-6 times with clean water. Repeat if necessary.
Use citric acid:
- Add appropriate amount of water and boil.
- Add 25g citric acid and leave it for 15 minutes.
- Empty the kettle and wash it for 5-6 times with clean water. Repeat if necessary.
Loading ...