Loading ...
Loading ...
Loading ...
Collecting Plates CleaningDisplay and Air Quality Indicator Instruction
Green:
Excellent
AQI ≤ 50
Yellow Green:
Good
50 < AQI ≤ 100
Yellow:
Moderately Polluted
100 < AQI ≤ 150
Red:
Hazardous
AQI > 150
Pic 1 Pic 3
Pic 2
1. Clean the collecting plates when the air purifier displays “ ”.
2. Turn off the power and unplug the unit. Wait 5 minutes. Then open the back shroud and pull out the collecting plates (Pic 1).
3. Follow the instructions on Pic 2 and Pic 3.
a. Slide to separate the seat and collecting part.
b. Separate the upper collecting part and bottom collecting part to wash.
4. Dry the collecting plates after cleaning (recommend over 24 hrs of drying time).
5. Put back the collecting plates in the direction of labeling.
6. Long press the Operation Button to clear “ " and reset.
AQI (Air Quality Index)
This is a calculated air quality index based on the
particle numbers that the sensor measures in the air.
Ranges from 0-500.
Cleaning Reminder
Displays when collecting plates
need to be washed.
Faulty Reminder
When “9XX” keeps appearing on the display
after running for more than 3 minutes, and
power indicator is blinking, clean the unit
and make sure to put every part back
correctly and make solid contact. Please
move to the Full Cleaning Cycle section for
more cleaning details.
If "9XX" is still on the display after
cleaning, please contact customer service
for further help.
Wind Speed Indicator
L1-L4, slow to fast.
Upper collecting part
Bottom collecting part
Collecting part
Seat
Detergent
AQI numbers are calculated based on the real time particles numbers� in some air
volume according to United States Environmental Protection Agency (EPA). The
numbers could be affected by the air flow speed,� air purifier position and ambient
environment. AQI is an indicator of air quality. As the AQI increases, an increasingly
large percentage of the population �is likely to experience increasingly severe adverse
health effects.
Loading ...
Loading ...
Loading ...