Loading ...
Loading ...
Loading ...
12 I ENGLISH
Model 71422
Model 71422 has a built-in LCD screen that displays three modes: GPS, digital compass, and level.
The unit is powered by one CR123A battery (included).
The battery included in the case with your
binocular powers the electronics that run the
GPS, digital compass, and other functions.
To install the battery, unscrew the battery cap
cover and remove the brass screw using a
coin or screwdriver. Slide the battery into the
opening with the positive terminal facing you.
Replace the screw and battery cap.
(Note: If the unit will not be used for a long period of time, the batteries
should be removed from the device.)
When the unit is turned on, a green battery icon
will appear in the upper right hand corner of the
LCD screen displaying the remaining battery
life. Replace the battery when the icon turns
red, indicating low power.
Note: To conserve battery life, turn off the electronic functions of the
binocular when not in use.
installing the battery
Fig. 12
Fig. 13
Battery Icon
Loading ...
Loading ...
Loading ...