Loading ...
Loading ...
Loading ...
Instruction Manual
SAFE BOX
Please do not lock the emergency key and emergency battery box into the cabinet.
4
Three ways to open the door
1. The first unlocking method: Use the emergency key.
Insert the emergency key into the right keyhole, turn it to the right to the end. Then turn the
knob to the right to open the safe door(Suitable for unlocking or for the first time, forgetting the
password, or when the battery is dead).
2. The second unlocking method: Use the keyboard password.
After installing the battery, press the "#" key, enter your password and then press the "#" key,
the screen displays "RIGHT", Then turn the knob to the right to open the door.
1
2
3
4
6 7
8
9 0
#
*
5
ERROR
SET
RIGHT
3. The third unlocking method: Use the emergency battery box + password.
Dual Alarm System
Under-voltage warning
When the voltage is around 4.8V, after opening the door, the buzzer "beep" will ring 9 times alarm, reminding
the user that the battery power is low and the user needs to repalce the battery.
How to use the adjustable shelf
Turn the fastener clockwise and pull out the
fastener horizontally, you can adjust the position
of the shelf or take out the shelf according to your
needs.
1. Place the safe at the installation place. Mark the drilling spots on the wall
from the inside pre-drilled holes, then remove safe and drill two holes.
2. Put the expansion bolts into the drilled holes, take the expansion bolt out of
the sleeves, then place the safe and align the pre-drilled holes with drilled
holes, and insert the expansion bolts into its sleeves from inside of the safe.
How to install foot mat?
Remove the sticker of the foot mat
and install it on the bottom of the safe
How to mount the safe?
5
1
2
3
4
6 7
8
9 0
#
*
5
ERROR
SET
RIGHT
1
2
3
4
6 7
8
9 0
#
*
5
OPEN
For the password Ⅱ, press "#" and enter ‘00’, then press the setting button, the buzzer "di" will sound, the screen
will display "ERROR" . (The buzzer will make the "di di" sound when anyone of the buttons is pressed during the
second password setting process)
① Enter your passwordⅡ, and press "#".
② Repeat the password, then press "#" to confirm.
③ The screen will display "RIGHT" indicate success.
2. Please verity the passwords after done the passworlds setting, and lock the door after verification.
Set Password Ⅱ
1. A single "di" sound indicating that the password has been set successfully, "di di di" sounds indicate
that the user does not enter the same password, please repeat the procedures.
Tip:
When the safe box’s battery is too low to open the door, insert
4AA batteries in the emergency battery box, plug the emergency
power cord into the emergency power jack on the bottom edge
of the panel, then enter the correct password to open the door.
5
1
2
3
4
6 7
8
9 0
#
*
ERROR
SET
RIGHT
2. In standby state, press the "9" button, all the lights are on at the same time, and then a beep of "di" , the
Vibration alarm mode is turned on. If the box is shaken or violent hit, it will give an alarm immediately, at this
point, enter the correct password to stop the alarm.
When power on, the system default for alarm is off.
When the door is opened, the alarm is turned off and needs to be turned on again.
1. After 3 consecutive time of wrong code, your safe will activate the alarm system, the alarm will sound for
one minute, then enter the correct password and the alarm will be cancelled. If you want to turn off the
alarm immediately, you need to open the safe with the emergency key, and then remove the battery.
Loading ...