Loading ...
Loading ...
Loading ...
Before YouCallForService...
Troubleshooting tips
Possible Causes What To Do
Clock and timer do Plug on range is not completely * Make sm'e electrical l)lug, is l)lugged,, into a live, properly
not work i]lserted in the electrical outlet, gr(mnded outlet.
A fuse in your home * Replace tile fl/se or reset tile circuit breaker:
may he blown or the
circuit breaker tripped.
Oven controls improperly set. * See the Using the clock and timer section.
Oven will not self-clean The oven temperature is * _Mlow the range to cool and reset the controls.
too high to set a self-clema
operation.
Oven controls improperly set. * See the Using the self-cleaning oven section.
The probe is plugged into * Remove the probe from the oven.
the outlet in the oven.
"Crackling" or This is the sound of the * This is normal.
"popping" sound metal heating and cooling
during both the cooking and
clemfing functions.
Excessive smoking Excessive soil. * Touch the CLEAR/OFFpad. Open the windows to
during a clean cycle rid the room of smoke. Wait m]til the LOCKEDlight
goes off'. Wipe up the excess soil and reset the cleau
cvcle,
Oven door will not Oven too hot. * Allow the oven to cool beh>w locking temperature.
open after a clean cycle
Ovennot clean after a Oven controls not properly set. * See the Using the self-cleaning oven secti()u.
clean cycle Oven was heavily soiled. * Cle;lu up he;P,'v, spillovers betol'e ,st;_x'tiu,_ the cleau
cycle. Heavily soiled ovens luav need to sell:cleau
again or tot a low_er_ period of time.
"LOCKED"flashes The self-cleml cycle has been * Close the oven door.
in the display selected hut the door is not
closed.
"LOCKED"light is The oven door is locked * Touch the CLEAR/OFFpad. Allow the oven to cool.
on when you want because the temperature
to cook inside the oven has not
dropped below the
locking temperature.
"F--and a number You have a function error code. * Touch the CLEAR/OFFpad. Put the oven back into
orletter" flash ()perafiou.
in the display If the function code repeats. * Disclmuect :111power to the range for at least 30
seconds and then reconnect power./f the flu]orion
eiToi" code repeats, call tot service.
38
Loading ...
Loading ...
Loading ...