Dahua VTH8A21KMS-W 7 inch and10 inch Android Indoor Monitor Quick Start Guide V1.0.2

Loading ...

3 Configuration

You need to configure IP, Wi-Fi, VTO parameters, SIP server information on the VTH, and then the VTH

can call the VTO and the management center.

The VTH screen only supports single-touch operation.

Configuration Overview

Step 1 Plan the location for the SIP server and plan IP and numbers for each VTO and VTH.

Step 2 Make sure that the there is no short circuit and open circuit.

Step 3 Configure parameters for VTO.

Step 4 Add VTH to the SIP server.

Step 5 Configure parameters for VTH.

Step 6 Commissioning.

Configuring VTH

3.2.1 Initialization

The default IP address of the VTH is 192.168.1.108.

You need to initialize the VTH when you log in for the first time.

Step 1 Power on the VTH.

Step 2 Select a language, and then tap Next.

Step 3 Set a quick configuration type either as Apartment or Villa, and then tap Next.

Step 4 Enter the password, confirm password and email.

 Password: Used to go to the project mode.

 Email: Used to reset the password.

Step 5 Tap OK to go to the main menu.

Loading ...

Dahua VTH8A21KMS-W Android IP & Wi-Fi Indoor Monitor