Loading ...
Loading ...
Loading ...
4°Add Rinse Aid
Your dishwasher is designed to use rinse aid for good drying
performance. Without rinse aid, your dishes and dishwasher interior
will have excessive moisture. The heat dry option will not perform
as well without rinse aid.
Rinse aid keeps water from forming droplets that can dry
as spots or streaks. It also improves drying by allowing
water to drain off of dishes after final rinse.
To add rinse aid, turn the
dispenser cap to "Refill" and lift
off. Pour rinse aid into the opening
until indicator level is at "Full."
Replace dispenser cap and turn
to "Lock." Make sure cap is fully
locked.
Full
Add
EINSE AID I h _____________,,,,__
NOTE: For most water conditions, the factory setting will give good
results.
• Check water hardness level to ensure no rings
or spots on your dishware before adding rinse
aid or adjusting the factory setting.
• If you are experiencing poor drying
performance, you may want to try a higher
setting.
Turn the arrow adjuster inside the dispenser to
change rinse aid setting.
5,$÷1÷et a Cycle eyeles vary
by eeel}
Efficient dishwashers run longer to save water and energy, just as
driving a car slower saves on gas. Typical cycle time is approximately
21/2hours, but can take less or more time to complete depending on
selections.
oSeleet Options {options vary
by eeel}
You can customize your cycles by pressing the options desired. If you
change your mind, press the option again to turn off the option. Not all
options are available for every cycle. If an invalid option is selected for a
given cycle, the lights will flash.
7,Start er Resume a @yeJ÷
NOTE: Run hot water at the sink nearest your dishwasher until the
water is hot. Turn off water.
• Push door firmly closed within 3 seconds of pressing START/
RESUME. If door is not closed within 3 seconds, the Start indicator
will flash, an audible tone will be heard, and cycle will not start.
IMPORTANT: If anyone opens the door (such as, for adding a dish,
even during the Delay Hours option), the START/RESUME button must
be pressed each time.
• Press START/RESUME to repeat the same cycle and options as in
the previous wash cycle.
This information covers several different models. Your dishwasher may not have all of the cycles and options described.
The most advanced and versatile cycle. Sensor Wash cycle Light to Medium 110 150 3.8 (14.5)
Sensor senses the load size, soil amount, and toughness of soil, to Tough/Baked-On 125 190 5.0 (19.1 )
| Wash adjust the cycle for optimal cleaning using only the amount of
water and energy needed. Heavy 125 190 7.7 (29.0)
Use for hard-to,clean, heavily soi!ed pots, pans, casseroles; and Heavy/Baked,On 140 205 7.9 (30.0)
This cycle is recommended to completely wash a full load of Light 110 150 2.8 (10.5)
I Normal normally soiled dishes. Selecting this cycle will default to the Medium 110 150 4.0 (15.0)
Wash options recommended for normal amounts of food soil. The
energy label is based on this cycle. Heavy 125 190 7.7 (29.0)
Use for lightly soiled items or china and crystal. Light to Medium 105 145 4.2(15.2)
When you need fast results, the 1 Hour Wash will clean dishes All soil levels 58 63 6.2 (23.5)
I 1 Hour using slightly more water and energy. Select the Precision Dry_
Wash or Precision Dry®+ option to speed drying times (adds
approximately 27 to 35 minutes to the 1 Hour Wash cycle).
Use for rinsing dishes, glasses, and si!verware that wi!l not be All soil levels 17 20 2,4 (9,0)
| washed right away. ..............................................................................................
On y Do n0t Use detergent!
Loading ...
Loading ...
Loading ...