Loading ...
Loading ...
Loading ...
Page 20
6. SteelFlex
™
Safety Duct
Assembling SteelFlex
™
Safety Duct
SteelFlex
™
safety duct must be secured to either the bell-mouth adapter ring or a 200mm mounting pipe.
1. Slide the steel ring clamp over the end of
the duct then insert the bell-mouth adapter
ring into the duct end
Parts required:
1. SteelFlex
™
safety ducting
2. Steel ring clamp
3. Bell-mouth adapter ring 200mm duct to
150mm riser
4. 150mm PVC riser pipe
5. 20mm self-drilling button head screws
1
2
3 4 5
2. Secure duct to the bell-mouth adapter at
regular intervals with 4 x 20mm button
head screws
4. Attach the mounting pipe to the bell-mouth
adapter and secure with 1 x 20mm button
head screw
3. Slide the steel ring clamp back up and
tighten to secure the bell-mouth adapter
and the duct
x4
x1
NOTE: Do not use duct tape to fasten the duct – the screws and hose clamp are adequate to secure the duct
to the bell-mouth adapter ring.
Figure 12: Duct assembling
Loading ...
Loading ...
Loading ...