Loading ...
Loading ...
Loading ...
www.PyleUSA.com
GETTING STARTED
REPAIR KIT
If your board needs repair, use the patches in the repair kit and follow these steps:
1. Deate the board completely, lay it at and wait for it to dry.
2. Cut a patch that is 2 inches larger than the tear/rip all the way around.
3. Use alcohol to clean the repair area.
4. Apply three coats of adhesive to the patch and the board. Wait 5 minutes in between each coat.
5. Place the patch over the tear/rip. The adhesive will react quickly, so make sure the positioning is precise/accurate.
Use the roller to ensure the patch lies at and even.
6. Wait 24 hours before re-inating the board.
STORAGE
Having an inatable SUP board makes portability and storage very easy. Here are some simple suggestions if
you plan on traveling with your SUP board.
• Avoid storing your SUP board in direct sunlight.
• If you have to store your board inated between uses, attach your pump to make sure the board is carrying the
correct air pressure.
• Do not roll up the board too tight when storing it while deated.
• If ns become bent, place them in boiling water and use heat (e.g. hairdryer) to bend them back into
position.
6
Loading ...
Loading ...