Makita XLC03ZBX4 User Manual

Loading ...

5ENGLISH

8. Be careful not to drop or strike

battery.

9. Do not use a damaged battery.

10. The contained lithium-ion batteries

are subject to the Dangerous Goods

Legislation requirements.

For commercial transports e.g. by

third parties, forwarding agents,

special requirement on packaging

and labeling must be observed.

For preparation of the item being

shipped, consulting an expert for

hazardous material is required.

Please also observe possibly more

detailed national regulations.

Tape or mask off open contacts and

pack up the battery in such a man-

ner that it cannot move around in

the packaging.

11. Follow your local regulations relat-

ing to disposal of battery.

12. Use the batteries only with the prod-

ucts specied by Makita. Installing

the batteries to non-compliant products

mayresultinare,excessiveheat,

explosion, or leak of electrolyte.

SAVE THESE

INSTRUCTIONS.

CAUTION: Only use genuine Makita batteries.

Use of non-genuine Makita batteries, or batteries that

have been altered, may result in the battery bursting

causingres,personalinjuryanddamage.Itwill

also void the Makita warranty for the Makita tool and

charger.

Tips for maintaining maximum

battery life

1. Charge the battery cartridge before completely

discharged. Always stop tool operation and

charge the battery cartridge when you notice

less tool power.

2. Never recharge a fully charged battery car-

tridge. Overcharging shortens the battery

service life.

3. Charge the battery cartridge with room tem-

perature at 10 °C - 40 °C (50 °F - 104 °F). Let

a hot battery cartridge cool down before

charging it.

4. Charge the battery cartridge if you do not use

it for a long period (more than six months).

FUNCTIONAL

DESCRIPTION

CAUTION: Always be sure that the tool is

switched off and the battery cartridge is removed

before adjusting or checking function on the tool.

CAUTION: Take care not to trap nger(s)

between cleaner and battery as shown in diagram

when loading battery. Trappingnger(s)maycause

injury.

Installing or removing battery

cartridge

CAUTION: Always switch off the tool before

installing or removing of the battery cartridge.

CAUTION: Hold the tool and the battery car-

tridge rmly when installing or removing battery

cartridge. Failure to hold the tool and the battery

cartridgermlymaycausethemtoslipoffyourhands

and result in damage to the tool and battery cartridge

andapersonalinjury.

►1. Red indicator 2. Button 3. Battery cartridge

To remove the battery cartridge, slide it from the tool

while sliding the button on the front of the cartridge.

To install the battery cartridge, align the tongue on the

battery cartridge with the groove in the housing and slip

it into place. Insert it all the way until it locks in place

with a little click. If you can see the red indicator on the

upper side of the button, it is not locked completely.

Loading ...

Makita XLC03ZBX4 18V LXT Lithium‑Ion Brushless Compact Cordless Vacuum, Trigger w/ Lock, Tool Only

User Manual - Page 5