Loading ...
Loading ...
Loading ...
3
Test result 3:
When LED3 light turns green as below, it means power is provided by
Midspan(45/78), and it is 802.3af standard, the output power is 15.4W.
( PD Max 12.95W)
Test result 4:
When LED3 light turns green and LED4 light turns blue as below, it
means power is provided by Midspan (45/78), and it is 802.3at standard,
the output power is 30W. (PD Max 25.5W)
Test result 5:
When the LED1 & LED3 both turn green, it means power provided by
Midspan & Endspan (4 pairs), and it is 802.3af standard, the output
power is 30W.
Test result 6:
When the 4 LEDs are on, it means power provided by Midspan &
Endspan (4 pairs), and it is 802.3at standard, the output power is 60W.
D1(green) D2(blue) D3(green) D4(blue) Result
V X X X
Endspan(1236)
802.3af (over Data)
V V X X
Endspan(1236)
802.3af (over Data)
X X V X
Midspan(4578)
802.3af(over Spare)
X X V V
Midspan(4578)
802.3at(over Spare)
V X V X 802.3af (4 pairs)
V V V V 802.3at (4 pairs)
Cable Tester
Functions
1. It can test corresponding double-twisted cable 1,2,3,4,5,6,7,8 and G.
Meanwhile, it can identify good connection, shorts, crossover or opens.
2. "OFF" means Power off, "ON" means normal scan, "SLOW" means
slow scan.
Operation
Slide the power switch to “on” (Normal grade) position or "S" (Slow grade)
position, and then connect the RJ45 /RJ11/RJ12 cable with Master Tester
and Remote Tester. The cable mapping will be automatically processed by
pin to pin scanning as below:
Pin 1-8 8P/8C Pin 1-6 6P/6C
Pin 2-5 6P/4C Pin 3-4 6P/2C
Loading ...
Loading ...
Loading ...