Loading ...
Loading ...
Loading ...
14 1514 14
OPERATION
FAN
To start the fan press the required speed (low, medium
or high) and the red and blue LED will illuminate.
To choose a different speed just press the new speed
regardless of whether the speed is higher or lower, the
selected speed blue LED will illuminate as well as the
red LED.
To stop the fan press the button below the blue
illuminate LED. The LED’s will go out.
Note:
Medium – 2 fans – 1 control
Island – 2 fans – 1 control
Large – 3 fans – 2 controls
LIGHTS
Note: Each pair of lights are individually controlled.
To turn on lights press the light button and the blue
LED will illuminate. To turn off selected lights press the
button below the blue illuminated LED. The LED’s will
go out.
OFF/TIMER BUTTON
To turn both the fan and light off at the same time
double press the OFF/TIMER button and the red and
blue LED’s will go out.
Pressing the OFF/TIMER button once, the red LED will
flash for 15 minutes, then turn the fan as well as any
LED lights off.
Read all instructions before installing and operating this appliance.
IMPORTANT SAFETY NOTICE
Read all instructions in this manual before operating the appliance. Save these instructions for future reference.
Always leave safety grills and filter in place. Without these components, operating blowers could catch on to hair,
fingers and loose clothing.
NEVER dispose cigarette ashes, ignitable substances or any foreign objects in to the blowers.
NEVER leave cooking area unattended. When frying, oil in the pan can easily overheat and catch fire. The risk of
self-combustion is higher when the oil has been used several times.
CONTROLS
OFF HIGH MED
FAN
LOW LIGHT
CLEANING
A build up of oil may occur if the Rangehood and baffle
filters are not cleaned properly and regularly. Some
discolouration of the baffle filter may occur if cleaned in
the dishwasher.
RANGEHOOD SURFACES
Clean periodically with hot soapy water and a clean
cotton cloth. Do not use abrasive detergent or steel
wool/scouring pads which will scratch and damage the
surfaces.
For heavier deposits, use a liquid degreaser.
After cleaning, you may use nonabrasive stainless steel
polish/cleaners to polish and buff the stainless lustre.
Always rub lightly, with a clean cotton cloth and with the
grain of the stainless steel.
Note: Never wipe or rub across the grain as this will
damage the surface finish.
BAFFLE FILTERS
The baffle filters fitted by the factory are intended to
filter out residue and grease from cooking. They are
required to be kept clean and should be cleaned after
every 30 hours of use or more often if required or after
heavy cooking.
Note: Always turn the Rangehood power point off
before removing filters.
To Remove
Lift latch and gently pull down front of baffle filter and
remove.
To Clean
1. Use warm soapy water and a soft cloth or put into
dishwasher on a ‘normal’ cycle.
2. Thoroughly clean and wipe down the inside of
Rangehood canopy.
To Fit
1. Position the rear of the baffle filter into the 2 slots.
2. Gently rotate the baffle filter into position, lift latch
and push into place and release latch.
Loading ...
Loading ...