Loading ...
Loading ...
Loading ...
953.163UK User Manual
Operation
When all connections to the amplifier are made, turn all rotary controls down and switch on the power (11).
The power LED will illuminate. To check for correct operation of the system, select an input source and output zone for
testing. In the following example, Mic.1 input and Zone 1 output have been selected.
• Turn the Zone 1 Bass and Treble rotary controls (7, 8) to the vertical (12 o’clock) position
• Turn up Zone 1 Master volume control (9) part way for testing
• Make sure that the Zone 1 assign button for Mic.1 channel (14) is pressed in
• Speak into the microphone connected to the Mic.1 input (36)
• Gradually turn up the Mic.1 level control (2) whilst checking the LED indicators for Zone 1 (10)
• The microphone should now be audible through loudspeakers connected to the Zone 1 speaker output.
• Increase the Zone 1 output level to the maximum required volume for that zone
• Reduce the Mic/Line level to compensate
The above process can be extended to check all other input channels.
If preferred, the system can be checked using the onboard multi-source audio player.
Full information on the operation of this feature is detailed below.
Repeat the above process for Zone 2 to check output to the speakers from the enabled input channels.
Each zone has Bass and Treble controls to adjust the tonal content.
Bass controls the low frequency content and Treble controls the high frequency content.
The vertical (12 o’clock) position is neutral, rotating to the left is cut and to the right is boost.
Adjust both controls for each zone to give the desired tonal character to the connected speakers.
Media player
The RM1202 is fitted with a built-in media player, which allows playback of music or audio messages stored as
standard compressed audio files on either USB pen drive or SD card.
The media player also has an FM radio tuner function and Bluetooth receiver as described below.
The output level of the media player is controlled by the LINE 5/USB control (6) on the front panel.
USB/SD
Push a USB pen drive into the USB port (13) and/or SD card into the SD card input (12) and the audio files
will start to play automatically. Turn up the MEDIA control gradually to hear the output from the speakers and
increase to the required level.
If play does not start automatically, press the SOURCE button and Play/Pause button () to check if the
player is set to play from the required memory device. If playback still does not start, try pressing the Previous
track and Next track buttons (, ). Otherwise, check that the audio files are standard compressed type.
Normal playback will read through all tracks on the storage device. Pressing the REPEAT button will step
through the repeat modes.
RT1 = repeat current track RND = random play RTA = repeat all tracks
Pressing the Previous track button () briefly steps backwards through tracks on the memory device. Press
and hold this button to decrease the playback volume.
SOURCE
USB / SD / FM tuner / Bluetooth input source selector
Previous track or FM channel / volume down
Play or pause current track / auto tune FM stations
Next track or FM channel / volume up
REPEAT
Repeat mode – off, single track or all
MUTE
Mute media player output
Loading ...
Loading ...