Loading ...
Loading ...
Loading ...
MAINTENANCE
17
IMPELLOR REPLACEMENT
• Place the pulley back onto
the impellor shaft.
• Replace the pulley support
plate and the 3 retaining
screws.
• Place the lower spring
into position and slide the
side cover up using slight
pressure to hold the spring
in place.
• Be sure to route the belt
correctly, as shown.
• Replace and tighten the
impellor shaft washer and
nut.
• Replace and tighten the
remaining screws and the
nut and washer.
• Replace the 2 spacer
washers on the impellor
shaft.
• Place the upper spring into
position and then nger
tighten the cover plate into
place as shown.
• Re-install the impellor shaft
nut and washer on the right
hand side, and tighten.
• Place the impellor and
shaft back into the front
scoop.
• Replace the 2 screws and 2
washers onto the impellor.
screw and washer
spring
spring
impellor shaft washer and nut
13
15
14
18
21
16
19
22
17
20
23
Loading ...
Loading ...
Loading ...