Loading ...
Loading ...
Loading ...
Installingthe dryer.
ElectricalInstallationfor ElectricDryers
A
A
.4,
WARNING:The fbllo_dng me spedfic
requirements fin proper and saf( electrical
installation ofy_)m (hyer. Failure to fi)llow
these instructions can create elecuical shock
and/or a fire hazard.
WARNING:This appliance MUSTbe properly
grounded. Elecnical shock can resuh if the
(hyer is not properly grounded. Follow the
inswuctions in this manual fin proper
grounding.
WARNING: DO NOTuse an extension cord widl
this duet. Some extension cords are not
designed to withslzmd the mnounts of
elecuical cunent this &yet utilizes and can
meh, creating electrical shock and/or fire
hazard. I_ocate the d_yer within reach of the
wall outlet, taking into account the length
of power cord to be Dnchased and allowing
some slack in the cord. Refer to Electrical
Requirements in this manual fin the proper
power _ord to be purchased.
_WARNING:A UL-approved suain relief must be
installed onto power cord. If the smfin relief is
not attached, the cord can be pulled out of the
(hyer and can be cut by any m_)vement of the
cord, resulting in elecuical shock,
_ WARNING: Usecopper receptacles only.
NOTE:Duets operating on 208-voh power supply xdll
have longer (hying times than those operating
on 240-voh power supply.
A wiring diagram is located inside the
(ontrol panel.
GroundingRequirements
_ DANGER:Improper connection of the
equipment-grounding (ondu(tor can resuh in a risk
of elecuic shock. Check xfith a licensed elecuician if
you are in doubt as to whether the appliance is
properly grounded.
(;rounding must be in accordance xdth local codes
and or(finan(es, or in the absem e of lo(al (odes, in
a(cordam e with die National Eledrk al (ode
ANSI/NFPA No. 70.
Fora grounded, cord-connected electric dryer:
[7] The dxyer MUSTbe grounded. In the event of
)- ),
a malfimction or breakdown11,grouncfing will
reduce the risk of ele_ trical shock by (rearing
a path of least resistam e for ele_tri_al cunent.
[_ Ifyore &yet is equipped xdth a power supply
(ord haxfng an equipment-grounding (ondu(tor
and a gr()unding plug, the plug MUSTbe
plugged into an appropriate, copper-wired
receptacle that is properly instzdled and
grounded in accordance with all local codes and
ordinances, ff in doubt, call a licensed electrician.
Fora permanently-connected electric dryer:
• The duet MUSTbe connected to a grounded
metal, permanent _dfing system; or an equipment-
grounding conductor must be run with the drcuit
conductors and connected to the equipment-
grounding temfinal or lead on the appliance.
Fora cord-connectedgasdryer:
• This &yet is equipped with a three-prong
(gr()unding) plug fi)r your protection against
shock hazard and should be plugged directly into
a properly grounded three-prong receptacle. Do
not cut or rem_)ve the grounding prong fiom this
plug.
16
Loading ...
Loading ...
Loading ...