Loading ...
Loading ...
Loading ...
- 4 -
HS-123521.1 EN
PARTS DESCRIPTION
1. LED display
2. Mist control
3. Temperature control button +
4. Temperature control button –
5. On/off button
6. Lock button
7. Heating plate
8. Water tank
9. Hanging loop
10. Handle
INSTRUCTIONS FOR USE
Operation:
Make sure the appliance is used on dry hair only.
1. Unroll the cable completely before plugging it.
2. Connect the appliance to the mains. “OFF” will be displayed on LED. Always hold the appliance by the handle.
The heating plate and its surface are hot.
3. Long press the on/off button for about 2 seconds. The appliance begins to heat up. The default temperature
(180℃) will be on the LED for a short time, and then the current temperature will be displayed.
4. Press temperature control button +/- to choose your desired temperature from 80℃ to 230℃. When the
current temperature reaches the set temperature, the temperature value will not change any more.
5. Divide the hair into separate strands, then use the appliance to clamp a strand and comb dowm slowly from
the roots to the tips of the hair. Make sure you do not touch your scalp with the appliance! Repeat the
process until you are satisfied with the result.
6. After use, switch the appliance off and unplug from the wall socket.
Clamp lock function
You can lock the appliance in a clamp postion. Clamp the heating plates, then press the lock button . To unlock
the heating plates, you can press the lock button in opposite direction.
Mist function
1. Take the water tank out, open the rubber stopper to fill proper water into the tank. The purified water is
recommended.
2. Close the rubber stopper tightly to prevent leakage. Wipe the surface of the water tank of any remaining
water. Install the water tank back.
3. Plug in the appliance and turn on the appliance. When the desired temperature is reached, you can press the
Loading ...
Loading ...
Loading ...