Loading ...
Loading ...
Loading ...
29
9. What if there are problems?
Problem Possible cause Solution
The table fan cannot be
switched on.
Table fan is not plugged in.
Connect the table fan to
a suitable wall socket or
computer.
The table fan is faulty.
Please contact Customer
Services at: www.beurer.com
Insucient passage of air.
The evaporation filter is dirty.
Clean or replace the
evaporation filter (see
“Cleaning and maintenance”
chapter).
The ventilation grille blocks
the air flow.
Open the ventilation grille to
allow air to flow through.
Table fan smells unpleasant.
The ventilation fan is new.
Unplug the table fan. Then
empty the water basin and
allow it to air for 12 hours.
The water in the PET bottle
is stale.
Replace the water in the PET
bottle.
The evaporation filter has
been damp for too long.
Allow table fan to run without
PET bottle, so that the
table fan can dry out the
evaporation filter.
Remove the evaporation
filter (see “Replacing the
evaporation filter” chapter)
and allow it to air dry.
The table fan is very loud.
The table fan is standing
on an unstable and uneven
surface.
Place the table fan on a
stable and level surface.
10. Disposal
For environmental reasons, do not dispose of the device with your household waste at the
end of its service life. Dispose of the device at a suitable local collection or recycling point
in your country. Dispose of the device in accordance with EC Directive – WEEE (Waste
Electrical and Electronic Equipment). If you have any questions, please contact the local
authorities responsible for waste disposal.
Loading ...
Loading ...
Loading ...