Loading ...
Loading ...
Loading ...
20
How To Clean the Pre-filter and Fine Pet Hair & Dander Trap
On a monthly basis, we recommend you check the Pre-filter and the Fine Pet Hair & Dander Trap for
visible particle build-up. If you see any, simply clean the filters using the steps below.
Note: Do NOT clean or wash the True HEPA Filter Cartridge. This will make it unusable.
1. IMPORTANT: First, unplug the air purifier from the electrical outlet.
2. Remove the front cover of the air purifier by pulling the front panel away from the purifier, as
shown in figure A.
3. Remove the Pre-filter, including the black Fine Pet Hair & Dander Trap, by pressing down on
the top tabs and pulling back, as shown in figure B.
4. Remove the black Fine Pet Hair & Dander Trap from the Pre-filter.
5. Gently vacuum the Pre-filter and the Fine Pet Hair & Dander Trap, as shown in figure C.
If visible build-up remains, use soap and water to gently wash the filters. (Reminder: Do not
clean or wash the True HEPA Filter Cartridge.)
6. I MPORTANT: Completely dry the Pre-filter and the Fine Pet Hair & Dander Trap before
re-installing them.
7. When completely dry, return the black Fine Pet Hair & Dander Trap to the Pre-filter.
8. Replace the Pre-filter containing the black Fine Pet Hair & Dander Trap to the air purifier by
first inserting the 3 tabs on the bottom, then pinching and inserting the 2 tabs on the top until
it snaps into place.
9. Replace the front cover panel by inserting the 2 tabs on the bottom and tilting the cover upward
to set it in place at the top. The front cover should be flush with the top of the air purifier.
10. Plug in the air purifier to an electrical outlet to resume air purification.
Figure B
Figure C
Figure A
Loading ...
Loading ...
Loading ...