Loading ...
Loading ...
Loading ...
g) If devices are provided for the connection of dust extraction and collection facilities,
ensure these are connected and properly used. Use of these devices can reduce
dust-related hazards.
4) Power tool use and care
a) Do not force the power tool. Use the correct power tool for your application. The
correct power tool will do the job better and safer at the rate for which it was designed.
b) Do not use the power tool if the switch does not turn it on and off. Any power tool that
cannot be controlled with the switch is dangerous and must be repaired.
c) Disconnect the plug from the power source and/or battery pack from the power tool
before making any adjustments, changing accessories, or storing power tools. Such
preventive safety measures reduce the risk of starting the power tool accidentally.
d) Store idle power tools out of the reach of children and do not allow persons
unfamiliar with the power tool or these instructions to operate the power tool. Power
tools are dangerous in the hands of untrained users.
e) Maintain power tools. Check for misalignment or binding of moving parts, breakage
of parts and any other condition that may affect the power tool’s operation. If
damaged, have the power tool repaired before use. Many accidents are caused by
poorly maintained power tools.
f) Keep cutting tools sharp and clean. Properly maintained cutting tools with sharp cutting
edges are less likely to bind and are easier to control.
g) Use the power tool, accessories and tool bits etc. in accordance with these
instructions, taking into account the working conditions and the work to be
performed. Use of the power tool for operations different from those intended could result
in a hazardous situation.
5) Service
a) Have your power tool serviced by a qualified repair person using only identical
replacement parts. This will ensure that the safety of the power tool is maintained.
5.2 ADDITIONAL SAFETY INSTRUCTIONS
WARNING: This product must be installed by a qualified electrician.
• You must also read and understand the following instructions concerning electrical safety
• Inspect all components and cables before installation, do not use if damaged.
• The LED floodlight must be installed to an appropriate electrical on/off switch
• Ensure the voltage marked on the product is the same as the electrical power supply
• Do not pull the power cable
• Turn off the power supply before installation
• Ensure the light is installed in accordance with the installation instructions
• Only install the light in the vertical position, do not install on a horizontal surface (i.e.
Ceiling)
• Do not install in humid environments such as bathrooms, shower rooms, Sauna etc.
• Do not point (Shine) the light directly into a persons eyes
• Do not install the light where it can be damaged or knocked
• Do not use the unit without the front glass installed.
5. HEALTH AND SAFETY INFORMATION
- 7 -
Loading ...
Loading ...
Loading ...