Loading ...
Loading ...
Loading ...
of the residual heat for the cooking zones
you are currently using.
The indicator may also appear:
• for the neighbouring cooking zones
even if you are not using them,
• when hot cookware is placed on cold
cooking zone,
• when the hob is deactivated but the
cooking zone is still hot.
The indicator disappears when the
cooking zone has cooled down.
5. DAILY USE
WARNING!
Refer to Safety chapters.
5.1 Activating and
deactivating
Press and hold to activate or
deactivate the hob.
Control bars come on after you activate
the hob and go off after you deactivate
the hob. When the hob is deactivated
you can see only .
When you activate the hob and place the
cookware in the correct position, the hob
recognizes it and the appropriate control
panel lights up. The red cooking zone
indicator appears above the control bar
and indicates the position of the pot.
5.2 Automatic Switch Off
The function deactivates the hob
automatically if:
• you do not place any cookware on the
hob for 50 seconds,
• you do not set the heat setting for 50
seconds after you place the
cookware,
• you spill something or put something
on the control panel for more than 10
seconds (a pan, a cloth). When you
hear the acoustic signal, the hob
deactivates. Remove the object or
clean the control panel.
• the hob gets too hot (e.g. when a
saucepan boils dry). Let the cooking
zone cool down before you use the
hob again.
• you do not deactivate a cooking zone
or change the heat setting. After some
time, the hob deactivates.
The relation between the heat setting
and the time after which the hob
deactivates:
Heat setting The hob deacti‐
vates after
1 - 2 6 hours
3 - 4 5 hours
5 4 hours
6 - 9 1.5 hours
5.3 Heat setting
Press the desired heat setting on the
control bar. You can also move your
finger along the control bar to set or
change the heat setting for a cooking
zone.
To deactivate a cooking zone, press 0.
5.4 Using the hob
The induction cooking surface consists of
12 single triangular zones in total. The
triangular zones may be activated
separately or can be combined in pairs to
create 6 standard cooking zones. The
pairs of triangular zones can be further
combined together in various ways.
Each pair of triangles is controlled by the
appropriate control bar. Each square on
the control panel represents one
standard cooking zone on the induction
cooking surface.
www.aeg.com10
Loading ...
Loading ...
Loading ...