Loading ...
Loading ...
Loading ...
Installation
WINDOW KIT INSTALLATION
Note: Once the exhaust hose assembly and adjustable window lider are prepared,
choose from one of the following two installation methods.
Type 1: Hung Window or Sliding Window Installation (for some models)
Or
and frame as shown.
1. Cut the adhesive foam seal A and B strips to the proper lengths, and attach them to the window sash
Or
Or
2. Insert the window slider assembly into the window opening.
between the glass and the window frame to prevent air and insects from getting into the room.
3. Cut the non-adhesive foam seal C strip to match the width(or height) of the window. Insert the seal
Or
4. If desired, install the security bracket with 2 screws as shown.
Foam seal B
(Adhesive type-shorter)
Foam seal A
(Adhesive type)
Foam seal B
(Adhesive type-shorter)
Foam seal A
(Adhesive type)
Window
slider A
Window slider
B(if required)
Window slider A
Window slider B
(if required)
Foam seal C
(Non-adhesive type)
Foam seal C
(Non-adhesive type)
2 Screws
Security Bracket
2 Screws
Bracket
Security
19
Loading ...
Loading ...
Loading ...