Loading ...
Loading ...
Loading ...
6
CLEANING, STORAGE AND
MAINTENANCE
To simplify cleaning, rinse the work bowl, cover, and
blade immediately after each use, so that food won’t dry
on them. Wash blade, work bowl, cover, and spatula in
warm, soapy water. Rinse and dry. Wash the blade
carefully.
Avoid leaving blade in soapy water where it may
disappear from sight. The work bowl and cover can be
washed on the top rack of a dishwasher. Insert the work
bowl upside down and the cover right side up. Put the
blade and spatula in the cutlery basket. Unload the
dishwasher carefully to avoid contact with the sharp
blade. Wipe the motor base clean with a damp sponge
or cloth. Dry it immediately. Never submerge the motor
base or the plug in water or other liquids.
The Cuisinart
®
Mini Prep Pro stores neatly on the
countertop. When it is not in use, be sure to leave it
unplugged. The hidden cord storage underneath the
motor base will help to keep any excess cord off the
countertop. Store the unit assembled to prevent loss of
parts. Store the blade as you would sharp knives – out of
the reach of children.
The
Cuisinart
®
Mini Prep Pro
is intended for
HOUSEHOLD USE ONLY.
Maintenance: Any service other than cleaning and
normal user maintenance should be performed by an
authorised Cuisinart Service Representative.
TROUBLESHOOTING
Motor doesn’t start or blade doesn’t rotate.
• Check plug is securely inserted into outlet.
• Check work bowl and cover are securely locked into
place.
• Be sure to press only one operation control button at
a time.
• This appliance comes with a resettable protection
device to prevent damage to the motor in the case of
extreme overload. Should unit shut off unexpectedly,
unplug it and let it cool for at least 15 minutes before
continuing.
Food is unevenly chopped.
• Try cutting food into smaller, even-sized pieces.
• Try processing smaller amounts of food per batch.
Food is chopped too fine or is watery.
• The food has been overprocessed. Use brief pulses,
or process for a shorter time. Let blade stop com-
pletely between pulses.
Food collects on work bowl cover or sides of prep
bowl.
• This is normal; turn machine off. When blade stops
rotating, remove cover and blade then clean bowl
and cover with spatula.
Food catches on blade.
• You may be processing too much food.
Carefully remove blade & clean food with spatula.
Loading ...
Loading ...
Loading ...