Loading ...
Loading ...
Loading ...
15
6 INSTALLATION OF THE DECORATION PANEL
Detach the intake grille.
panel.
- Slide the 2 grille hooks toward the middle of the decoration
- Open the intake grille and remove.
Install the paneldecoration
- Align the indicate "△" on the panel to the indicate
"△" on the unit .
decoration
- Attach the panel to the unit with the supplied screws
as shown in figure below.
decoration
1 Intake grille
2 Grille hook
1 Decoration panel
2 Screws (M5)(supplied with the panel)
- After installing the decoration panel, ensure that there is no
space between the unit body and decoration panel.
Otherwise air may leak through the gap and cause dewdrop.
(See figure below)
Mount the intake grille.
Fasten the control box lid with 2 screws .
1
2
×
√
1
2
Connect the 2 wires of the decoration panel to the
mainboard of the unit.
10-core wire
5-core wire
Ensure that the buckles at the back of the grille be properly
seated in the groove of the panel.
Loading ...
Loading ...