Loading ...
Loading ...
Loading ...
20 / EN
Dryer / User Manual
C
When the child lock is activated,
the child lock warning indicator on
the screen turns on.
Child lock deactivates when the
drying machine is turned off and on
by the On/Off/Cancel knob.
When the drying machine runs and
the child lock is active, it beeps
twice when the program selection
knob is turned. If the child lock
is deactivated without returning
the program selection knob to its
previous position, program will
terminate due to the change in the
program selection knob position.
5.9 Changing the program after
it is started
You can change the program you selected to
dry your laundry with a different program after
the drying machine starts running
• For instance, select Extra Dry program
by turning the On/Off/Program selection
knob to select Extra Dry instead of Iron
Dry.
• Press the Dry/Time Level button to start
the program.
Adding and removing clothes
during stand-by
If you want to add or remove clothes to/from
the drying machine after the drying program
starts:
• Press the Dry/Time Level button to put
the drying machine in Stand-by state.
The drying operation stops.
• Open the loading door while in Stand-
by state, and close the door after you
remove or add laundry.
• Press the Dry/Time Level button to start
the program.
C
Adding laundry after the drying
operation starts may cause the
dried laundry inside the machine
to mix with wet laundry and leave
the laundry damp at the end of
operation.
Adding or removing laundry
during drying may be repeated as
many times as you wish. But this
operation continuously interrupts
the drying operation, and thus
increases program duration and
energy consumption. So, it is
recommended to add laundry
before the program starts.
If a new program is selected by
turning the program selection
knob while the drying machine is
in stand-by, the running program
terminates.
Do not touch the inner surface of
the drum while adding or removing
clothes during a continuing
program. The drum surface is hot.
5.10 Cancelling the program
If you want to cancel the program and ter-
minate the drying operation for any reason
after the drying machine starts running, turn
the On/Off/Cancel knob, the program will be
cancelled.
A
The inside of the drying machine
shall be extremely hot when you
cancel the program during machine
operation, so run the refresh
program to allow it to cool down.
5.11 End of program
When the program ends, the Fibre Filter
Cleaning and Water Tank warning symbols
on the program observation indicator turn on.
Loading door may be opened and the dryer
machine becomes ready for another run.Bring
the On/Off/Program selection knob to On/Off
position to turn the drying machine off.
C
If the laundry is not removed
after the program is completed,
the wrinkle prevention function
activates for 2 hours to prevent the
laundry inside the machine to get
wrinkled. The program tumbles the
laundry with 10-minute intervals to
prevent them from wrinkling.
Loading ...
Loading ...
Loading ...