Loading ...
Loading ...
Loading ...
m
ill
• The teft and right corners of front cabinet base
contain screws to allow individual adjustment of all
four corners. Adjust the front and rear of each
corner untiI leveling iscomplete.
• Turn rolteradjustment screws(Aor B)tothe right to
raise cabinet, or to the left to lower cabinet. Front of
refrigerator must be 1A.(6 mm), or ½ bubble on your
level, higher than the back of your refrigerator.
• After leveling, turn stabilizing leg(C -some
models) to the right until firmly against floor.
• Locate metal clips(A) mounted to inside of toe grille
assembly. Hook bottom set of clips inside metal
molding beneath freezer. Press forward on upper
part of grille until top portion snaps into place.
[ CAUTION ]
Toavoid personalinjury or propertydamage caused by
refrigeratortipping, stabiIizingleg must be firmly against
floor
Door Removal
Some installations may require door removat to move or
dispose of unit
Tools Required
5/_,,hex nut driver
9/32"hex nut driver
IMPORTANT:
• Save all screws for reuse.
For plug removal requiring use of flat blade screwdriver
or putty knife, blade of tool must be covered with
masking tape to avoid damage to refrigerator
finish. For plugs using a screwdriver or nut driver style
head, use appropriate tool to avoid damage to plugs.
1. Remove door buckets from refrigerator and freezer
door (some models).
2. Remove top hinge cover and hinge.
• Remove hinge cover(A). Cover snaps off.
• Use 5116"hex nut driver to remove screws(B) of top
hinge(C). Remove and retain all shims(D).
3. Remove refrigerator door from center hinge(C) by
lifting from center hinge pin(B). Remove and retain
door closure(A)from top of hinge pin(B).
A--*6
4. Remove center hinge pin using 9/32"hex nut driver.
Due to tight fit of pin, firm pressure may need to be
applied. Remove and retain all shims.
5. Remove freezer door by lifting door off bottom hinge.
An internal support rod(A) may slide out of hinge
socket. Replace rod before hanging door.
• Inspect bottom hinge(C)to verify all shims are with
bottom hinge pin(B). Retain door closure(A)from top
of hinge pin.
A_
6. Toreplace doors, follow steps 1-5 inreverse order.
Door Reversal
If you wish to reverse doors on unit, call 1-800-843-0304,
option 4, to schedule a service appointment. This visit
will be free of charge if appointment is made within three
months of purchase date.
Install Water Filtration Cartridge
1 Bypass cartridge must be removed before
connecting water to unit. Remove bypass cartridge
from water filter head in rear right corner of
Loading ...
Loading ...
Loading ...