Loading ...
Loading ...
Loading ...
13
TROUBLESHOOTING
You can solve many common problems easily, saving you the cost of a possible service call. Try the
suggestions below to see if you can solve the problem before calling the servicer.
Troubleshooting Guide
PROBLEM
POSSIBLE CAUSE
REMEDY
The appliance
does not
operate.
Appliance is not connected to a power
source.
The appliance is turned off.
Tripped circuit breaker or a blown
fuse.
Connect the appliance.
Switch on the appliance.
Switch on circuit breaker or replace
fuse.
The appliance
is not cold
enough.
The temperature is not set correctly.
The ambient temperature could
require a higher thermostat setting.
The door was opened too often.
The door was not closed completely.
Door is not hermetically-sealed.
The condenser is too dirty.
The ventilation opening is blocked or
too dusty.
Check the set temperature.
Raise the setting of the thermostat.
Do not open the door more often
than necessary.
Close door properly.
Check the door seal and clean or
replace.
Clean the condenser when
necessary.
Clear the obstructions and clean off
the dust.
The appliance
turns itself on
and off
frequently.
The room temperature is higher than
average.
A large number of bottles has been
added to the unit.
The door is opened too often.
The door is not closed completely.
The door gasket does not seal
properly.
Put the appliance in a cooler place.
Let appliance to work for a while
until the set temperature has been
reached.
Do not open the door more often
than necessary.
Close door properly.
Check the door seal and clean or
replace.
The light does
not work.
The appliance is not connected to a
power supply.
Tripped circuit breaker or a blown
fuse.
The light was switched off on the
control panel.
Connect the appliance.
Switch on circuit breaker or replace
fuse.
Switch on the light.
Vibrations
The appliance is not properly level.
Level the appliance with the
adjustable feet.
The appliance
seems to
make too
much noise.
The rattling noise may come from the flow of the refrigerant, which is normal. As
each cycle ends, you may hear gurgling sounds caused by the flow of refrigerant
in your appliance.
If temperature fluctuations occur, the contraction and expansion of the inner walls
Loading ...
Loading ...
Loading ...