Loading ...
Loading ...
Loading ...
SWEEPING - The fanning action of
rotating line can be used for a quick
and easy clean up. Keep line parallel
to and above the surfaces being swept
and move the tool from side to side.
MAINTENANCE SCHEDULE
EDGING - The Twist-N-Edge feature
allowsfor easy edging of sidewalks,
patios, driveways, etc. Adjust trimmer
to the edging position.Allow only the
tip ofthe llneto make contact. Do not
forcetrimmer line into work area.
Edging _,_
CARE & MAINTENANCE TASK WHEN TO PERFORM
Check for Loosefasteners and parts Before each use
Check for damaged or worn parts Before each use
Clean unit and labels After each use
Clean air tilter Every 5 hours of operation'
......Replace spark plug Yearly
GENERAL RECOMMENDATIONS
The warranty on this unit does notcov-
er itemsthat have been subjected to
operatorabuse or negligence. To re-
ceive fullvalue from the warranty, the
operator must maintain unitas instruct-
ed in this manual. Various adjustments
w_ll need to be made periodically to
properlymaintain your unit.
CHECK FOR LOOSE
FASTENERS AND PARTS
• Spark Plug Boot
. Air Rter
• HousingScrews
• Assist Handle Screws
• Shield Screw
CHECK FOR DAMAGED OR
WORN PARTS
Refer replacement of damaged/worn
partsto yourSears Service Center.
• EngineStop Switch - Ensure switch
functionspropedy by pressing and
holdingthe switch in the "Stop" posi-
tion. Make sure engine stops;then
restart engine and continue.
• FuelTank- Do not use un_ if fuel tank
showssignsof damage or leaks.
• Shield - Discontinue use of unitif
debrisshield is damaged.
CLEAN UNIT & LABELS
• Clean the unit using a damp cloth
with a mild detergent.
* Wipe off unitwith ac{ean dry Moth.
CLEAN AIR FILTER
Do notclean filter in gasoline or other
flammable solvent to avoid creating a
fire hazard or producing harmful evap-
orative emissions.
A dirty air filter decreases engine per-
formance and increases fuel consump-
tion and harmful emissions. Always
clean after every 5 hours ofoperation.
• Clean the cover and the area around
itto keep dirtand debris from falling
intothe carburetor chamber when
the cover isremoved.
• Remove partsas illustrated.
• Wash the filter in soap and water.
• Allow filter to dry.
• Replace parts.
SFilter
Cover
Loading ...
Loading ...
Loading ...