Loading ...
Loading ...
Loading ...
User instructions
16
NOTES AND REFERENCES
Only
run the soak program with partial loads.
The options cannot be used with the soak program.
The ENERSAVE option cannot be used with soak, ultraclean, or any programs which
do not include the final drying stage.
* Standard program under
EN 50242
. If present, the
E
NERSAVE
option must be
enabled.
**
See information sheet provided
***
IEC/DIN
reference program. If present, the
ENERSAVE
option must
be
enabled
.
**** Reference program for laboratories. Detergent:
20 g
in the
dispenser
+
10 g
in
the
door
or tablet. Con
figuration: see photo in "using the baskets" section.
(1)
Program consumption and duration figures have been measured in accordance
with the EN 50242 standard. Values may vary depending on water supply and
ambient temperatures and the type and quantity of
dishes loaded.
REFERENCES for the ENERGY LABEL supplied with the dishwasher:
- Annual energy consumption is based on 280 standard wash cycles with cold
water and consumption of low-energy operating modes. Actual consumption
depends on the way in which the appliance is used.
- Water consumption is based on 280 standard wash cycles. Actual
consumption depends on the way in which the appliance is used.
- Information refers to the EN 50242 STANDARD program (identified in the
program table), which is the most effective in terms of combined energy and
water consumption. The program is recommended for dishes with a normal
level of dirt.
- Drying efficiency class on a scale from “G” (minimum efficiency) to “A”
(maximum efficiency).
Loading ...
Loading ...
Loading ...