Loading ...
Loading ...
Loading ...
OPTIONS DISH LOAD TYPES DESCRIPTIONS USE WITH:
Pans, casseroles, etc. wit h Activates the PROSCRUB® spray jets and provides Heavy Duty or Normal
ProScrub tough food so I, ntens fed water spray to the back of the ower eve rack cyc e
/ May add heat and time to the Cycle.
\ ...............................f
Tosanitize your dishes and
glassware in accordance
with NSF/ANSI Standard
184 for Residential
Dishwashers.
Raises the water temperature in the final rinse to
approximately 155°F (68°C). This high temperature rinse
sanitizes your dishes and glassware in accordance with
NSF/ANSI Standard 184 for Residential Dishwashers.
Certified residential dishwashers are not intended for
licensed food establishments.
The Sanitize or Sani Rinse option adds heat and time to the
cycle.
Normal cycle. Heavy
Duty cycle automatically
uses Sani Rinse. Only
these sanitization cycles
have been designed to
meet the NSF/ANSl
requirements.
1,0._.-----_._ Loads Containing t0ugh, increases the target water temperature during the was h Heavy DutY or N0imal
Hi-Temp baked-on food port ons of the cyc e cyc es
r
l. Scub
Adds heat, wash time and water to the cycle.
For best drying results, dry Turn OFF when loads contain plastic dinnerware that may be All cycles, except Rinse
dishes with heat. sensitive to high temperatures. Only. Automatic with all
This option with the use of rinse aid will provide the best wash cycles unless you
drying performance, turn it off.
....................._ To run your dish washer at Delays the start of a CYcleup to 4 hours: All cycles, except Rinse
4Hour a ater t me or dur ng off On y
Delay ,, Select a wash CYcle and option& Press 4 H0ur De!ay. Press
_, peak nours
:..................... : START!RESUME. Close the door firmly.
Control Lock To avoid unintended use of
your dishwasher, or cycle
and option changes during
a cycle.
To turn on Lock, press and hold Heat Dry for at least Anytime
4 seconds.
To turn off Lock, press and hold Heat Dry for at least
4 seconds.
When Control Lock is lit, all buttons are disabled. Ifyou press
any pad while your dishwasher is locked, the light flashes
3 times. The dishwasher door can be opened while the
controls are locked.
IMPORTANT: The sensor in your dishwasher monitors the soil level. Cycle time and/or water usage can vary as the sensor adjusts the
cycle for the best wash performance. If the incoming water is less than the recommended temperature or food soils are heavy, the cycle
will automatically compensate by adding time, heat and water as needed.
To cancel wash
cycle
Close the door firmly. The dishwasher starts a 2-minute drain (if needed). Let the dishwasher
drain completely.
O Washing TOfollow the clean indicator glows when a cycle is finished.
Drying progress of your
" . fyouseecttheSan R nse opt onl when the San Rnsecycle sfnshed, thesantzed ndcator
Clean d snwasner cyc e
-s_otzed glows. If your dishwasher did not properly sanitize your dishes, the light flashes at the end of the
cyc_e. This can happen if the cyc_e is interrupted_ _rthe water c_u_d n_t be heated t_ the required
Loading ...
Loading ...
Loading ...